AP-145019 0.9-Meter UHF Grid Parabolic Antenna | 1300-1600 MHz | 19 dBi
NATO NCAGE CODE HOLDER COMPANY
MIL-STD-810G COMPLIANT PRODUCTS
MIL-STD-461E/F COMPLIANT PRODUCTS
IP67 RATING COMPLIANT PRODUCTS

AP-145019

Grid Parabolic Antenna 0.9 Meters

ModelProduct DescriptionFrequencyGainDownloadPDFEnquiry
AP-145019Grid Parabolic Antenna 0.9 Meters1300-1600MHz19 dBi.Download DatasheetDownload ManualPost Enquiry

The AP-145019 is a professional-grade directional antenna designed for high-performance terrestrial point-to-point communication in the 1300–1600 MHz band. Featuring a compact 0.9-meter (3-foot) diameter grid parabolic reflector, this model offers a strategic balance of high directivity (19 dBi gain) and exceptional tactical portability, making it an ideal choice for rapid field deployments and fixed-station radio links where space or weight is a constraint.

Precision Directional Performance

The AP-145019 provides a focused 16-degree beam-width, ensuring that RF energy is concentrated toward the target receiver to maximize link stability. With a 23 dB Front-to-Back ratio, it effectively minimizes interference from rearward noise sources. The antenna utilizes high-conductivity brass radiating elements and a precision dipole feed with an Air-Cored transmission line to maintain clear analogue or digital transmission across its 150 MHz bandwidth.

Tactical Mechanical Hardening

Constructed from 6063T6 architectural-grade anodized aluminum alloy, the AP-145019 is built to withstand extreme mechanical stress while remaining ultra-lightweight. The grid architecture is a key efficiency feature, allowing wind to pass through the reflector and reducing drag significantly compared to solid dishes. This results in an exceptional wind rating of 200 Km/Hr. The entire assembly is finished with an epoxy-based anti-corrosive powder coating in military olive green, providing a defensive shield against salt fog and UV degradation.

Operational and Logistical Efficiency

At a gross weight of just 10 Kgs, the AP-145019 is highly portable and manageable for single-operator transport, though two are recommended for rapid mast installation. It features an integrated +/- 5 degrees elevation tracking mechanism for fine-tuning signal alignment after mounting. For mission versatility, the mounting hardware at the rear permits a quick switch between Horizontal and Vertical polarization. Electrically, the antenna operates at direct D.C. ground, shielding connected radio equipment from lightning-induced transients.

Detailed Technical Features

  • Strategic Gain: 19 dBi mid-band gain for reliable terrestrial links.
  • Stable VSWR: Maintains a VSWR of better than 1.5:1 for consistent impedance matching.
  • Power Handling: Supports continuous RF power up to 250 Watts.
  • Lightning Hardened: Integrated low-resistance discharge path to ground for equipment protection.
  • Microwave Precision: Optimized for the 1.3 GHz to 1.6 GHz spectrum, ideal for high-capacity backhaul.

Detailed Mechanical Features

  • Reflector Dimensions: 0.9-meter (3 feet) diameter using 12 mm aluminum grid pipes.
  • Elite Fasteners: All screws, nuts, and bolts are manufactured from Marine Grade Stainless Steel.
  • Fine Alignment: Integrated elevation tracking mechanism (+/- 5°) for peak signal optimization.
  • Mounting Interface: Clamps securely to vertical masts with a diameter up to 52 mm (2 inches).
  • Quick Assembly: Primary feed horn is fitted with a quick fastener system for fast field setup.

Detailed Environmental Features

  • Hurricane Resilience: Rated for survival in winds up to 200 Km/Hr (125 MPH).
  • Thermal Window: Operational from -30°C to +70°C.
  • Theater Hardening: Anodized and powder-coated finish designed for coastal and tactical environments.
  • Humidity Tolerance: Certified for operation in 0 to 95% RH environments.

Key Advantages

  • Exceptional Portability: At only 10 Kgs, it is one of the most mobile high-gain solutions in its class.
  • Low Wind Loading: The grid design minimizes the "sail effect," allowing it to be mounted on lightweight portable masts.
  • Maintenance-Free Build: Stainless steel hardware and epoxy coating ensure a long service life in harsh climates.

Primary Applications

  • Tactical Point-to-Point Links: Establishing secure, high-gain data backhaul for forward operating bases.
  • Remote Digital Backhaul: Connecting remote utility sensors or CCTV stations across difficult terrain.
  • L-Band/UHF Infrastructure: Reliable directional links for broadcast and telecommunication infrastructure.
  • Emergency Response: Rapidly deployable directional link for disaster zones where infrastructure is compromised.

 

FeatureSpecificationTactical Benefit
Gain19 dBiReliable signal focus for mid-range hops.
Gross Weight10 KgsExtremely portable; ideal for lightweight masts.
Wind Rating200 Km/HrExtreme stability in high-wind zones.
Tracking+/- 5° ElevationEnables perfect signal optimization in the field.

 

Design Features: The AP-145019 grid parabolic antenna consists of full Parabolic reflector having a diameter of 0.9 Meter for use in point-to-point analogue and digital communication systems. The mounting arrangement of grid parabolic Antenna permits to change the polarization from horizontal to vertical and vice-versa.

Constructions: Radiating elements and the dipole feed are made of high quality brass. The grid parabolic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of grid parabolic antenna are of stainless steel.

Tracking Mechanism: The AP-145019 grid parabolic antenna supplied with elevation tracking mechanism where fine adjustments is necessary to optimize the signal strength of radio link.

Electrical Specifications:
Frequency Range1300-1600 MHz
Gain19 dBi.
Bandwidth150 MHz.
PolarizationVertical or Horizontal
Input Impedance50 Ohms
Radiation PatternDirectional
Beamwidth -3dB.16 Degrees
Front to Back Ratio23 dB.
VSWR - Equal To or Better Then1:1.5
RF Power Handling Capacity250 Watts
Input TerminationN-Female
Lightning ProtectionDirect Ground


 

Mechanical Specifications:
Antenna MaterialsAll Aluminum
Mounting Hardware -MaterialsStainless Steel
Weight10 Kgs.
Wind Rating200 Km/Hr.
Support Pipe O.D.25.4 mm (1 Inch)
Support Pipe MaterialAluminum
Diameter of Parabolic Reflector0.9 Meter
Radiating MaterialAll Brass
Reflector Grid MaterialAluminum Tube 12.4 mm (1/2 Inch)
Support & Rim MaterialAluminum Tube 1 Inch 3 mm wall
Maximum Mount Pipe Diameter52 mm (2 Inches)


 

Environmental Specifications:
Operating Temperature(-)30 to +70 Degrees Celsius
Storage Temperature(-)40 to +80 Degrees Celsius
Humidity0-95% RH