AP-240027

The AP-240027 is a professional-grade directional antenna designed for high-performance point-to-point communication in the 2300–2600 MHz S-band. Featuring a 1.2-meter (4 feet) diameter grid parabolic reflector, this antenna offers a strategic balance of high gain (27 dBi) and tactical portability, making it an ideal choice for both rapid field deployments and permanent fixed-station radio links.

Precision Directional Performance

The AP-240027 provides a focused 7-degree beam-width, ensuring that RF energy is concentrated toward the target receiver to maximize link stability and range. With a 26 dB Front-to-Back ratio, it effectively rejects interference from neighboring towers or rearward noise sources. The antenna utilizes high-conductivity brass radiating elements and a precision dipole feed to maintain clear analogue or digital transmission across a 200 MHz bandwidth.

Tactical Mechanical Hardening

Constructed from high-grade aluminum, the AP-240027 is built to withstand extreme mechanical stress. The grid architecture is a key efficiency feature, allowing wind to pass through the reflector and reducing drag significantly compared to solid dishes. This results in an exceptional wind rating of 200 Km/Hr. All fasteners, including screws, nuts, and bolts, are manufactured from marine-grade stainless steel to prevent corrosion in high-salinity coastal environments.

Operational and Logistical Efficiency

At just 18 Kgs, the AP-240027 is highly portable and manageable for tower-top installations. It features an integrated +/- 5 degrees elevation tracking mechanism for fine-tuning signal alignment after mounting. For mission versatility, the mounting arrangement permits a near-instant switch between Horizontal and Vertical polarization. Electrically, the antenna operates at direct D.C. ground, shielding connected radio equipment from lightning-induced transients and atmospheric noise.

Detailed Technical Features

• Strategic Gain: 27 dBi mid-band gain for reliable long-distance terrestrial links.
• Stable Impedance: Maintains a VSWR of better than 1.5:1 for consistent signal flow.
• Power Handling: Supports continuous RF power up to 250 Watts.
• Lightning Hardened: Integrated low-resistance discharge path to ground for equipment protection.
• Microwave Precision: Optimized for the 2.3 GHz to 2.6 GHz spectrum, ideal for high-capacity backhaul.

Detailed Mechanical Features

• Reflector Dimensions: 1.2-meter (4 feet) diameter using 12 mm aluminum grid pipes.
• Elite Fasteners: All mounting hardware is manufactured from Stainless Steel.
• Fine Alignment: Integrated elevation tracking mechanism (+/- 5°) for peak signal optimization.
• Mounting Interface: Clamps securely to vertical masts with a diameter up to 76 mm (3 inches).
• Support Framework: 25.4 mm (1-inch) aluminum support pipe for robust structural integrity.

Detailed Environmental Features

• Hurricane Resilience: Rated for survival in winds up to 200 Km/Hr (125 MPH).
• Thermal Window: Operational from -30°C to +70°C.
• High Humidity Tolerance: Certified for operation in 0 to 95% RH environments.
• Corrosive Theater Ready: Anodized aluminum and stainless hardware protect against salt fog and industrial pollutants.

Key Advantages

• Optimal Gain-to-Weight Ratio: Delivers 27 dBi gain while remaining light enough (18 Kgs) for rapid setup.
• Low Wind Loading: The grid design minimizes the "sail effect," reducing the structural demand on masts.
• Field Adjustable: Easy polarization and elevation changes allow for quick link optimization.

Primary Applications

• Point-to-Point Backhaul: Establishing high-capacity data links for telecommunications and ISP networks.
• Tactical Military Links: Secure, high-gain communication for mobile command centers and forward bases.
• Remote Surveillance: High-speed data transmission for remote CCTV and sensor arrays across long distances.
• Emergency Response: Rapidly deployable directional link for disaster zones where infrastructure is compromised.