AP-85022

The AP-85022 is a professional-grade, high-gain terrestrial communication antenna designed for the 700–990 MHz frequency range. Featuring a 2-meter (6.6 feet) diameter grid parabolic reflector, it is engineered for tactical and fixed-station point-to-point links, providing an exceptional 22 dBi gain while maintaining a lightweight, low-drag profile suitable for rapid deployment.

Precision Directional Performance

The AP-85022 delivers a highly focused 12-degree beam-width, ensuring that RF energy is concentrated precisely on the intended receiver. This narrow aperture, combined with a 28 dB Front-to-Back ratio, significantly reduces interference from co-located equipment. The use of an air-cored transmission line and high-quality brass radiating elements minimizes signal loss, ensuring maximum efficiency for both analogue and digital radio links.

Industrial-Grade Mechanical Hardening

Constructed for longevity in hostile theaters, the 2-meter reflector is made from 6063T6 architectural-grade anodized aluminum alloy. The open grid architecture is a critical efficiency feature, allowing the antenna to survive wind speeds up to 210 Km/Hr by minimizing wind load compared to solid dishes. For protection against saline coastal air and acid rain, the entire assembly is finished with an epoxy-based anti-corrosive powder coating in a tactical olive green.

Operational and Tactical Efficiency

Designed for the field, the AP-85022 requires only two operators for installation. It features a quick fastener system for the central feed horn and a mounting arrangement that allows for a near-instant switch between Horizontal and Vertical polarization. To ensure a perfect link, the integrated elevation tracking mechanism provides +/- 5 degrees of fine adjustment. For electrical safety, the antenna operates at direct D.C. ground, shielding your radio equipment from lightning-induced transients and atmospheric noise.

Detailed Technical Features

• High-Gain Directivity: 22 dBi mid-band gain for long-distance terrestrial backhaul.
• Stable Signal Isolation: 28 dB Front-to-Back ratio and 24 dB cross-polarization discrimination for high SNR (Signal-to-Noise Ratio).
• Broad UHF Coverage: Supports an 80 MHz bandwidth within the 700-990 MHz spectrum.
• Power Capacity: Handles up to 250 Watts of continuous RF power.
• FCC Compliance: Fully compliant with FCC Part 101.115, ensuring it meets rigorous standards for beam-width and interference rejection.

Detailed Mechanical Features

• Reflector Design: 2.0-meter diameter grid using 12 mm aluminum pipe members.
• Alignment Precision: +/- 5 degrees of elevation tracking for fine link optimization.
• Hardware Build: All screws, nuts, and bolts are manufactured from Marine Grade Stainless Steel.
• Mounting Interface: Clamps securely to vertical masts with a diameter up to 75 mm (3 inches).
• Weight Profile: Gross weight of 50 Kgs, making it a viable option for tactical mobile masts.

Detailed Environmental Features

• Extreme Wind Survival: Rated for speeds up to 210 Km/Hr (130 MPH).
• Thermal Hardening: Operational from -30°C to +70°C.
• Corrosive Theater Protection: Anodized aluminum plus epoxy powder coating prevents oxidation.
• Lightning Protection: Integrated low-resistance discharge path to ground.

Key Advantages

• Tactical Mobility: At 50 Kgs and 2 meters, it provides a superior balance of high gain and portability.

• Low Wind Loading: The grid design allows wind to pass through, reducing the structural demand on the mounting tower.
• Precision Tuning: The elevation tracking mechanism ensures you can "dial in" the perfect signal regardless of terrain variations.

Primary Applications

• Tactical Point-to-Point Links: Reliable high-capacity data backhaul for forward operating bases.
• Fixed Station Infrastructure: Professional terrestrial radio links for utility or telecommunication networks.
• Digital Backhaul: High-gain reception and transmission for digital analogue radio links.
• Remote Surveillance: Connecting distant sensor arrays or CCTV stations to central command hubs.