JC10-1900
RCIED Jammer High Gain Omni Antenna
| Model | Product Description | Frequency | Gain | Download | Enquiry | |
|---|---|---|---|---|---|---|
| JC10-1900 | RCIED Jammer High Gain Omni Antenna | 1800-1990MHz | 10 dBi |  |  |  |
The JC10-1900 is a professional-grade, High Gain RCIED Jammer Collinear Antenna specifically engineered for the 1800–1990 MHz spectrum. Delivering a potent 10 dBi gain, this tactical aperture is optimized for neutralizing Remote Controlled Improvised Explosive Devices (RCIEDs) and disrupting high-speed data links within the GSM-1800 and PCS-1900 bands. Featuring a rugged fiberglass radome and a standardized NATO mounting interface, the JC10-1900 is designed for persistent electronic protection on military vehicles, man-packs, and fixed-site base stations.
Design: Precision Signal Saturation
The JC10-1900 is optimized for mission-critical electronic attack hubs that require a focused "Denial Zone" around a moving vehicle or man-pack operator. By utilizing vertically stacked high-quality brass radiating elements fed in-phase, the antenna compresses the vertical beamwidth to a narrow 9 degrees. This concentration of RF energy on the horizon provides a massive 10 dBi gain, significantly extending the effective jamming radius against modern remote triggers and cellular communication nodes.
Construction: MIL-SPEC Tactical Hardening
Built for the rigors of frontline maneuvers, the antenna is fully enclosed in a high-strength Cylindrical Fiberglass Radome (44 mm diameter). This enclosure offers superior RF transparency while providing the mechanical robustness required to withstand physical impact, UV radiation, and heavy ice accumulation. The support structure is crafted from 6063T6 ultra-corrosion resistant architectural aluminum alloy, and all mounting fasteners are made of stainless steel. Finished in Military Olive Green, the antenna maintains a low visual signature while resisting salt fog and corrosive gases.
Key Technical Characteristics
- Powerful 10 dBi Gain: Provides elite-level signal saturation for terrestrial electronic warfare missions.
- Narrow 9° Vertical Beam: Precision energy focusing toward the horizon to maximize effective standoff range.
- High Power Capacity: Rated for 200 Watts of continuous-duty RF transmission.
- NATO Interface Ready: Standard NATO 4-hole pattern base for rapid "bolt-on" installation on armored vehicles and command hubs.
- Modular Versatility: Supports vehicle side-mounting, base station pole mounting, or direct man-pack equipment integration.
- Advanced Feed Technique: Utilizes co-axial stub and spark gap technology for smooth VSWR (Better than 2:1) across the entire band without field tuning.
- Lightweight & Rugged: Weighs approximately 1.5 Kgs with a 1.20-meter length, making it ideal for mobile tactical use.
EW, SIGINT & Monitoring Compatibility
- Electronic Warfare (EW): Primary defense against improvised devices utilizing GSM-1800 and PCS-1900 remote triggers.
- Signals Intelligence (SIGINT): The high-gain profile and clean noise floor of the brass elements allow for the interception of weak signals and high-speed spectrum scanning.
- Persistent Monitoring: The 360-degree horizontal coverage ensures total theater awareness, acting as a persistent electronic "tripwire" for situational dominance.
Global Compliances & MIL-STD Hardening
The JC10-1900 is engineered for survivability in the world's most hostile environmental theaters:
- Thermal Tolerance: Operational from -30°C to +70°C, covering all global theaters.
- Humidity Resilience: 0 to 95% RH rating for tropical and high-salinity maritime environments.
- Wind Stability: Aerodynamic fiberglass profile rated for structural integrity in winds up to 150 Km/Hr.
Design Features : The JC10-1900 RCIED Jammer Collinear Antenna is rugged all weather model, enclosed in a Fiber Glass enclosure, uses 6063T6 ultra corrosion resistant architectural aluminum alloy and high quality brass radiating elements. The high gain RCIED jammer collinear antenna does not require any field tuning or adjustments. This fiber glass jammer collinear antenna is specially designed to mount on the side of the vehicle with the help of “L” type bracket or on the roof-top hole of the vehicle. Similarly the antenna can also be supplied with pole mounting hardware (optional).
| ||||||||||||||||||||||||||||||||||||||||||||||||
