JC3-1820 S-Band Jammer Antenna | 1800-2000 MHz 250W Collinear
NATO NCAGE CODE HOLDER COMPANY
MIL-STD-810G COMPLIANT PRODUCTS
MIL-STD-461E/F COMPLIANT PRODUCTS
IP67 RATING COMPLIANT PRODUCTS

JC3-1820

RCIED Jammer Omni Antenna

ModelProduct DescriptionFrequencyGainDownloadPDFEnquiry
JC3-1820RCIED Jammer Omni Antenna1800-2000MHz3 dBi.Download DatasheetDownload ManualPost Enquiry

The JC3-1820 is a professional-grade, ultra-compact S-Band Jammer Collinear Antenna specifically engineered for the 1800–2000 MHz spectrum. Optimized for both man-portable (man-pack) and vehicular mounting, this ruggedized aperture is a critical asset for neutralizing GSM-1800 and PCS-1900 triggers. Delivering a consistent 3 dBi gain in an exceptionally lightweight 350-gram form factor, the JC3-1820 ensures persistent 360-degree electronic protection for elite tactical units.

Design: SWaP-Optimized Tactical Dominance

The JC3-1820 is designed to meet strict SWaP (Size, Weight, and Power) requirements, making it an ideal choice for high-mobility dismounted operations.

  • Ultra-Lightweight Build: At just 280 mm (11 inches) in length and weighing only 350 grams, it minimizes the physical burden on the operator while maintaining high-intensity power throughput.
  • In-Phase Collinear Architecture: Large-diameter brass radiating elements are stacked vertically and fed in-phase to project a consistent omnidirectional pattern. The wide 78-degree vertical beamwidth ensures a reliable "denial bubble," effective even when the operator is running or the vehicle is traversing steep terrain.
  • Stable VSWR: Utilizes specialized co-axial stub and spark gap techniques to maintain a smooth VSWR of 2:1 across the entire 200 MHz bandwidth without any field tuning.

Construction: Field-Hardened Resilience

Built for 24/7 survivability in the world’s most punishing environmental theaters.

  • High-Strength Fiberglass Radome: The radiating core is fully protected by a 44 mm diameter fiberglass enclosure. This material offers excellent RF transparency and superior mechanical robustness to withstand physical impact and environmental stress.
  • Military-Grade Materials: Features high-class aluminum alloy support structures and all-brass internal radiators, ensuring a quiet signal path and maximum electrical efficiency.
  • Flexible Mounting Options: Specifically designed for roof-top hole installation on vehicles, direct mounting onto jammer equipment for man-pack use, or optional pole mounting for fixed-site base stations.
  • MIL-SPEC Aesthetics: Supplied in Military Olive Green to maintain a low visual signature for covert and tactical operations.

EW, SIGINT & Monitoring Compatibility

  • Electronic Warfare (EW): Primary defense against RCIED (Remote Controlled IED) triggers utilizing GSM-1800 and PCS-1900 frequencies.
  • Signals Intelligence (SIGINT): The clean noise floor and stable gain allow for high-speed spectrum scanning and discovery of microwave tactical networking.
  • Theater Awareness:

 

The 360-degree horizontal coverage acts as a persistent electronic "tripwire" for situational dominance.

Key Technical Characteristics

  • Extreme 250W Power Capacity: One of the few ultra-compact antennas capable of managing 250 Watts of continuous-duty RF transmission.
  • High Wind Stability: Aerodynamic profile rated for structural integrity in winds up to 200 Km/Hr.
  • Environmental Tolerance: Operational from -30°C to +70°C, ensuring performance in arctic freezes or desert heat.
  • Zero Maintenance: Factory-tuned architecture requires no periodic calibration or field adjustments.
  • Input Termination: Available with N-Female or N-Male connectors to suit diverse equipment interfaces.

 

Design Features : The JC3-1820 Jammer Collinear Antenna is rugged all weather model, enclosed in a Fiber Glass enclosure, uses high class aluminum alloy and does not require any field tuning or adjustments. This fiber glass jammer collinear antenna is specially designed to mount on the roof-top hole of the vehicle or can be supplied to mount the antenna directly on the jammer equipments. The JC3-1820 antenna is highly suitable for man-pack and vehicle mounting applications. Similarly the antenna can also be supplied with pole mounting hardware (optional).

Constructions: The special co-axial stub and spark gap techniques are used for smooth VSWR and constant Gain over entire the 1800 - 2000 MHz frequency band. The JC3-1820 jammer collinear antenna consists of large diameter brass radiating elements stacked vertically, fed in phase and enclosed in fiber glass housing. The Fiber Glass has excellent transparency for Radio Signal and mechanically Robust to support extra mechanical strength to the collinear antenna. The antenna supplied with olive green colour for defense application.

Electrical Specifications:
Frequency Range1800 - 2000 MHz.
Gain3 dBi.
BandwidthEntire Band
PolarizationVertical
Input Impedance50 Ohms.
Radiation PatternOmni-directional
Beamwidth -3dB.76 Degrees (Vertical)
VSWR - Equal To or Better Then2:1
RF Power Handling Capacity250 Watts
Input TerminationN-Female


 

Mechanical Specifications:
Wind Rating220 Km/Hr
Overall Length260mm
Shipping Length290mm
Support Pipe MaterialAluminum
Radome Outer Diameter44mm
Radome Length190mm
Radiating Elements - MaterialAll Brass
Gross Weight250 Grams


 

Environmental Specifications:
Operating Temperature(-) 30 to +70 Degrees Celsius
Storage Temperature(-) 40 to +80 Degrees Celsius
Humidity0 to 95 % RH