AWD-30-1000

The AWD-30-1000 is an ultra-wideband Military Grade Omnidirectional Discone Antenna engineered for uncompromising performance across the 30–1000 MHz spectrum. This heavy-duty aperture is a critical asset for tactical base stations requiring a single-antenna solution for VHF/UHF communications, spectrum monitoring, and high-power jamming. With a massive 500W RF power handling capacity and full MIL-STD-810G environmental compliance, the AWD-30-1000 provides 360-degree situational awareness and electronic dominance in the most punishing theater environments.

Design: Unified Spectrum Command & Electronic Warfare

The AWD-30-1000 is optimized for mission-critical hubs that cannot afford the latency or logistical burden of multiple antenna arrays.

• Massive 30–1000 MHz Bandwidth: Seamlessly covers the entire tactical spectrum from low-band VHF combat nets to high-band UHF cellular and public safety frequencies. This allows a single station to monitor or jam everything from PTT radios to modern data links.
• High-Intensity 500W Capacity: Built for continuous-duty transmission, this discone manages up to 500 Watts of RF power. This is essential for establishing a dominant "denial bubble" in Electronic Attack (EA) missions or providing robust C2 links over long distances.
• Superior 78° Vertical Beamwidth: The wide vertical aperture ensures consistent hemispherical coverage. This is vital for maintaining links with aircraft at various elevations and ensuring signal saturation in complex, mountainous terrain.
• Linear Low VSWR: Precision-engineered to maintain a VSWR better than 2.5:1 across the entire 970 MHz wide band, protecting high-power amplifiers from reflected power damage during frequency-hopping operations.

Construction: MIL-SPEC Hardening & Rapid Deployment

Built for survivability in extreme theaters, the AWD-30-1000 balances its massive 3-meter overall length with tactical agility.

• Aerospace-Grade Materials: Constructed from architectural 6063T6 aluminum alloy with marine-grade stainless steel fasteners. The use of Teflon and Nylon insulators ensures electrical stability under high thermal RF loads.
• Corrosion & Environmental Defense: The entire assembly is finished with an epoxy-based Olive Green powder coating. This provides immunity to salt fog, acid rain, and UV radiation, meeting rigorous MIL-STD-810G standards.
• Protected Signal Path: The N-Female termination and feed cable are enclosed within the mounting pipe, shielding the most vulnerable connections from sand, moisture, and mechanical stress.
• Modular Tactical Setup: Despite its size, the antenna features removable cone and disc elements for streamlined transport (2.7m shipping length). The specially designed hardware allows for fast installation on masts up to 52 mm in diameter.

Technical Features

• Unified 30–1000 MHz Coverage: Eliminates the need for multiple VHF and UHF antennas.
• High RF Power Handling: Supports up to 500 Watts for intensive jamming or C2 missions.
• True Omni-Directional Pattern: Provides 360-degree horizontal coverage for total situational awareness.
• D.C. Grounded Architecture: Integrated protection against lightning and static noise for a clean SIGINT noise floor.
• Rugged Wind Rating: Built to withstand environmental stress and wind speeds up to 180 Km/Hr.
• Global Environmental Compliance: Tested for salt fog, shock, rain, and extreme temperatures (-30°C to +70°C).

Strategic EW, SIGINT & Monitoring Compatibility: AWD-30-1000

The AWD-30-1000 is the "Master Hub" for tactical base stations, providing an unprecedented 33:1 frequency ratio. Its ability to maintain a stable 2.5:1 VSWR across the entire 30–1000 MHz spectrum without any mechanical tuning makes it the premier omni-directional choice for unified Electronic Warfare (EW), Signals Intelligence (SIGINT), and Spectrum Monitoring.

1. Electronic Warfare (EW) & Electronic Attack (EA)

In Electronic Warfare, the AWD-30-1000 acts as a High-Power Broadband Denial Umbrella. While directional antennas are used for surgical strikes, this discone provides a 360-degree "electronic perimeter" for localized area protection.

• Full-Spectrum Jamming: Seamlessly covers everything from Low-VHF (tactical PTT and combat nets) to High-UHF (LMR, public safety, and cellular triggers). A single 500W transmitter can engage legacy VHF threats and modern UHF initiators simultaneously or in rapid "sweeps" without risking amplifier damage.
• Hemispherical Denial Bubble: The 78-degree vertical beamwidth is a decisive EW advantage. It ensures that jamming energy is projected not just toward the horizon, but significantly upward. This creates a "protection dome" effective against ground-based threats and low-to-mid altitude drones (C-UAS).
• High-Wattage Sustenance: Built to handle 500 Watts, the fully welded aluminum construction and Teflon/Nylon insulators prevent thermal breakdown during long-duration electronic attacks. It maintains its structural and electrical integrity even under the intense heat generated by high-power signal saturation.

2. Signals Intelligence (SIGINT) & Electronic Support (ES)

For SIGINT operators, the AWD-30-1000 is an elite Search, Intercept, and Alert tool. Its linear response across nearly 1 GHz of bandwidth is vital for modern high-speed digital signal processing.

• "Wide-Open" Frequency Scanning: Most antennas have "blind spots" or gain-tilt over such a wide range. The AWD-30-1000 provides a consistent 2.15 dBi gain, allowing SIGINT receivers to scan from 30 MHz to 1000 MHz with total confidence that the detected Signal Strength (RSSI) accurately reflects the threat's power.
• Clean Spectrum Acquisition: The use of 6063T6 aluminum and high-quality welded hubs minimizes Passive Inter-Modulation (PIM). For SIGINT, this translates to an ultra-low noise floor, enabling the interception of weak, low-probability-of-intercept (LPI) signals that would otherwise be lost in hardware-generated noise.
• 360-Degree Threat Detection: As a true omni-directional antenna, it serves as the primary "Tripwire." Once a signal of interest is detected anywhere in the 360-degree field, its location can be handed off to a high-gain directional array (like the LP-30-2000) for localized exploitation and analysis.

3. Spectrum Monitoring & Tactical Surveillance

The AWD-30-1000 is designed for "Persistent Awareness" in the most punishing environmental conditions, from maritime salt spray to desert sandstorms.

• Ground-to-Air Master Hub: The 78-degree vertical beam is optimized for monitoring aviation bands and ground-to-air tactical links. It maintains a solid link with an aircraft from the moment it appears on the horizon until it reaches high elevation angles relative to the base station.
• Static & ESD Immunity: The antenna is D.C. Grounded, which bleeds off Precipitation Static (P-Static) generated by wind, dust, or rain. For monitoring teams, this results in a significantly cleaner signal and protects sensitive receiver front-ends from electrostatic discharge (ESD) during inclement weather.
• Consolidated Monitoring Station: A single AWD-30-1000 can simultaneously monitor:
  • VHF Low (30-88 MHz): Military tactical combat nets.
  • VHF High (136-174 MHz): Maritime, ATC, and emergency services.
  • UHF (380-1000 MHz): TETRA, P25, GSM 900, and tactical data links.

Design Features: AWD-30-1000 discone antenna is specially designed for Omni directional coverage. Due to it’s low VSWR through entire band from 30-1000 MHz., this discone antenna can be used as a transmitting and receiving antenna with high efficiency, to meet the broadband requirement of a base station antenna such as spectrum monitoring or Jamming application. The Discone antenna when packed, comes with Cone and Disc elements removed from the antenna body for ease of packing and shipment.

Construction: AWD-30-1000 wideband discone antenna is rugged all weather model, does not require any field tuning or adjustments. The compact size of discone antenna allows easy handling and specially designed mounting hardware results in fast installation. The cone and disc hubs of wide band discone antennas are made of high quality aluminum and all fasteners are of marine grade stainless steel. Discone Antenna termination and feed cable lie enclosed inside the mounting pipe for complete weather protection. The antenna is supplied with powder coating finish to protect it further from sever environmental conditions.